OSPF Lab 12

Posted by Mohamed Ouamer in OSPF on 06 23rd, 2010 | no responses

Tasks:

1. Enable area 0 on the network.

2. Configure the network so that:

R1 will use S1/0 interface to reach the subnet 111.111.2.0/24.
R2 will use S1/1 interface to reach the subnet 111.111.1.0/24. You are allowed to use ip ospf cost statement one time. Use only interface level commands.

3. Configure the network so that OSPF hello packets and periodic refreshes of LSAs will not be sent over the serial links, when the topology is stable.

4. Set the maximum number of demand circuits retransmissions to the half of the default value.