OSPF Lab 11

Posted by Mohamed Ouamer in OSPF on 06 20th, 2010 | no responses

Tasks:

1. Configure area 0 on the frame relay cloud, and on Ethernet interfaces of R1, R2, and R3. In addition, configure area 4 between R1 and R4.

2. Configure RIP on R4 and R5 according to network diagram.

3. Create the following loopback interfaces on R2:

Loopback0: 2.2.0.2/24
Loopback1: 2.2.1.2/24
Loopback2: 2.2.2.2/24
Loopback3: 2.2.3.2/24

Add Loopback interfaces to area 2, and configure R2 to advertise a summary route for to reach its loopback interfaces.

4. Redistribute between RIP and OSPF on R4. R1 should send only route to OSPF domain to reach the RIP domain’s resources. The number of redistributed prefixes into OSPF should not exceed 3.

5. No automatic entries should be created on R1 and R2. Configure R1 and R2 to accomplish this.

6. Configure the network so that OSPF external routes will be seen on R4 with an administrative distance of 180.

7. Configure R2 to send traffic for RIP subnets toward R3, and send traffic for internal OSPF subnets toward R1. Do not use any interface level command.

8. Configure R4 to suppress the sending of Syslog messages when it receives LSA Type 6 packets.